Great range of findings including jump rings, split rings, earwires, headpins, eyepins and much more - great value too!
Subcategories
Size: approx. 18mm. Ball size: 3mm. For hygiene reasons earwires cannot be returned once opened, unless faulty.
4g pack of small round crimp beads, a jewellery making essential.
3mm silver plated crimp bead covers. Ideal for use with 2mm, and smaller, crimps.
Size : 31mm (l) x 16.5mm (w).Hole size : 3mm. Sold singly.
2mm tiny gold plated crimp beads in a 4g pack, a jewellery making essential.
Size: 6mm. Depth: 2.5mm. Hole size: approx. 1mm.
Pack of 4 antique silver tone large connectors, measuring 28mm x 25mm.
Size: approx. 18mmBall size: 3mm For hygiene reasons earwires cannot be returned once opened, unless faulty.
4g pack of round small silver tone crimp beads.
Size: 10mm. Diameter of wire: approx. 0.78mm.
Size: 5mm. Diameter of wire: approx. 0.7mm.
Size: 34mm (h) x 27mm (w). The hole size at the top of the connector is approximately 2mm.
Size: 21mm (overall length from top of the loop) x 7mm (w). The rectangular area measures 12mm x 7mm. Hole size: approx. 6.5mm (l) x 4mm (w).
Size : 31mm (l) x 16.5mm (w)Hole size : 3mm. Sold singly.
Size approx : 6mm (total length) x 3mm (external width)/2mm (internal width).Hole size: 1.2mm.
Size: 25mm Hole size approx: 23mm Wire thickness: 0.8mm These hoops do not have a ready made bend at the end, which makes it super easy to add any bead to the hoop!
Pack of 10 lovely spacer bars with a gorgeous flower pattern, will hold two rows of beads. Great for multiple strand bracelets!
Size: approx 37mm (l) x 16mm (w). Sold singly.
Pack of 100, made of flexible wire, split rings are like a small key ring and offer greater security than a jump ring.
Size: approx. 14mm (l) x 7mm (w).The outer width tapers down to approx 3.5mm at the base.This will comfortably take cord or leather up to approx 5mm in size.
Size: 12mm x 7mm Hole size approx: 0.9mm. Sold singly.
A pack of 50 copper tone bead caps, they give a lovely finish to your beads and are great for hiding uneven holes!
Great value pack of 200, a jewellery making essential.
Pack of one 15mm chunky copper tone connector, hollow and relatively lightweight.
Choice of pack sizes - pack of 20 or great value pack of 50. Silver plated brass wire guardians/protectors. These help to protect stringing materials from excessive wear.
Pack of 20, or great value pack of 50. Antique bronze coloured brass wire guardians/protectors. These help to protect stringing materials from excessive wear.
Pack of 20, or great value bulk pack of 50. Silver tone wire protectors. These help to protect stringing materials from excessive wear.
Antique bronze tone coil end crimps, available as a pack of 10 or a pack of 50.
Pack of 4 brass end caps, perfect for ending cords and attaching clasps to necklaces and bracelets. Use with round cord, also great for Kumihimo!
Choice of pack sizes
Size: 26mm (l) x 5mm (w). Hole size: 2.2mm.
Size : 18mm (l) x 14mm (w)Bar : 20mm in length
Size: 5mm. Wire diameter: approx. 0.6mm.
Available in packs of 1 pair or 5 pairs of earwires. Sterling silver ball end ear wires, a quality product for your jewellery making projects.
Pack of 2 or pack of 10 Sterling silver headpins, an essential for all your jewellery making projects.
Available as a pack of two, or as pack of four clasps.
Size: 4mm. Wire diameter: approx. 0.6mm.
Size : 22mm (w) x 7.5mm (total length)Hole size: approx. 2.5mm x 1mm.
Gold plated coil end crimps, available as a pack of 10 or a pack of 50.
Lovely necklace bails with a large loop, suitable for use with various stringing materials. Available as a pack of 5, or as a bulk pack of 15.
Pack of 4 silver tone pinch bails, suitable for use with various stringing materials. They can accommodate a pendant of up to approximately 3mm in thickness.
Size: approx: 5mm x 3.5mm. Diameter of wire: 0.7mm
Size : 6mm (w) Hole size: 1mm Pack of 5g (approx 200).
Available in packs of 1 pair or 5 pairs of earwires, a quality product for your jewellery making projects.
Available as a pack of 5 or 15. Large copper tone necklace bails which can be fixed to a variety of materials to form a pendant.
Size approx 37mm (l) x 30mm (w). The hole size at the top of the connector is approx 2mm.
Pack of 2 sterling silver eyepins, an essential finding for all your jewellery making projects.
Available as a pack of 10 or as a bulk pack of 40 bails. Silver plated spring bails, suitable for use with various stringing materials. They can accommodate a pendant of up to approximately 2.5mm in thickness.
Pack of 10 cord ends, or pack of 100. These fold over cord ends are suitable for leather, suede, waxed cotton cord, ribbon and similar materials.
Size: 18mm (l) x 14mm (w). Bar: 20mm in length.
Pack of 50 3mm covers, ideal for use with 2mm and smaller crimps. They create a lovely, professional finish to your work, looking like a small round bead when they are closed.
50 bronze tone brass headpins, ideal for all your jewellery making projects.
Pack of 50 bronze coloured brass eyepins, ideal for all your jewellery making projects.
Copper coloured brass headpins, ideal for all your jewellery making projects.
Copper coloured brass eyepins, ideal for all your jewellery making projects.
Pack of two sterling silver wire guardians/protectors, to help to protect stringing materials from excessive wear.
Pack of two or pack of ten sterling silver calottes, also known as clamshells or necklace ends, to cover knots or crimp beads at the end of your cord.
This sterling silver necklace tag will create a very professional finish to your creations. Sold as a pack of 1, or a bulk pack of 5.
Size: 18.5mm (l) x 16.5mm (w). Thickness: approx 1.5mm. Hole size: 1.5mm.
Pack of 2 or pack of 10 bolt ring clasps, a jewellery making essential.
Pack of 4, or pack of 10 silver tone end caps. Perfect for ending cords and attaching clasps to necklaces and bracelets. Use with round cord, also great for Kumihimo!
Size: approx. 7mm (l) x 4mm (w)Hole size: 1.2mm.
Size 14mm (l) x 7mm (w).Hole size approx 1.6mm.
12mm (l) x 7mm (w) Hole size approx: 1.3mm
These lovely rose gold plated ribbon ends give a neat finish to jewellery made with ribbon or cord. Available as a pack of 10, or as a pack of 50.
Size: approx. 21mm (l) x 11mm (w). The hole size at the top is approx 2mm and the lower three measure approximately 3mm.
Large antique silver tone hook and eye clasp, an ideal way to finish your design. A chunky clasp great for those who struggle with a lobster clasp. Pack of one set (hook and eye/ring).
10mm (w) x 15mm (l) Hole size approx : 1mm Material : Brass
A lovely large antique copper plated toggle clasp with leaf detail. The perfect clasp for chunky designs, or for those who struggle with a lobster clasp. Pack size : 1 set
Size: 26mm (l) x 13.5mm (w). Sold singly.
Size: 31mm (l) x 17mm (w)Hole size: 3mm. Sold singly.
Pack of 20, or great value pack of 50 copper coloured brass wire guardians/protectors. These help to protect stringing materials from excessive wear.
Size : 23mm (l) x 8.5mm (w).
Pack of 4, or pack of 10 silver tone end caps. Perfect for ending cords and attaching clasps to necklaces and bracelets. Use with round cord, also great for Kumihimo!
Ornate antique silver tone hook and eye clasp, an ideal way to finish your design. Great for those who struggle with a lobster clasp. Pack of one set (hook and eye/ring).
Size: 23mm (l) x 12mm (w) Hole size: 2.5mm. Sold singly.
Size: 10mm. Diameter of wire: approx. 1mm.
Size: approx. 18mmBall size: 3mmFor hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: 6mm. Depth: 2.5mm. Hole size: approx. 1.2mm.
Size: 6mm. Hole size: approx. 1.2mm.
Pack of 60 bronze tone leaf pattern bead caps. These lovely bead caps measure approx 6mm across, with a depth of approx 2mm.
Pack of 4 sets, or pack of 10 sets. An easy to use alternative to a lobster clasp.
Pin length: approx. 12mmPad size: 6mm Stainless steel post and brass head. For hygiene reasons earring findings cannot be returned once opened, unless faulty.
Size: 9mm (l) x 4mm (w) Hole size: 1.8mm Lead, nickel and cadmium free.
Size: approx. 21mm.Ball size: 3mm.Nickel free surgical steel (stainless steel grade 316L).For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Size: 12mm (l) x 7mm (w). Hole size: 1.3mm.
Size: 9mm (w) x 12mm (l)Hole size: 6mm approx Bar: 16mm in length
Clasp size: 12mm (l) x 6mm (w) Hole size approx: 1.5mm.
Available as a pack of 5, or as a value pack of 10. Lovely pendant bails with a flower pattern, suitable for use with various stringing materials.
Size: approx: 19mm (l) x 9mm (w)Loop size: 1.5mmNickel Free.For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Pack of 100 small, plain flower shape bead caps in a silver tone finish. These lovely brass bead caps measure approx 4mm across, with a depth of approx 2mm.
Size approx: 4.2mm (diameter)Depth: 3.4mmHole Size: 0.6mm
Pin length: approx 12mm.Pad size: 4mm. For hygiene reasons earring findings cannot be returned once opened, unless faulty.
Pin length: approx 12mm.Pad size: 8mm. Hole size: 1.5mm For hygiene reasons earring findings cannot be returned once opened, unless faulty.
Pack of 4 brass end caps, perfect for ending cords and attaching clasps to necklaces and bracelets, use with round cord, also great for Kumihimo! Inner size 3.5mm.
Size: 14mm (l) x 12mm (w).Bar: 19mm in length. Sold as one set.
Size: 9mm (diameter of catch) Length from hole to hole: approx 18mm Hole size approx: 1.2mm.
Size: 27mm (l) x 5mm (w). Hole size: 2.2mm.
Size: 15mm (l)The hole size of the loops is approx. 2mm.
Pack of two slide tubes designed for use with bead weaving projects made with Delica beads. They have side flaps that are open on both ends. To attach simply slide an end row of beads into the tube, then fold down the side flaps and attach the loop to the clasp.
Pack of 50 pre opened stainless steel 7mm pre opened jump rings. An essential item in jewellery making, with a variety of uses such as attaching clasps.
Pack of 50 pre opened stainless steel 8mm open jump rings. An essential item in jewellery making, with a variety of uses such as attaching clasps.
Pack of four antique silver tone end caps, perfect for ending cords and attaching clasps to necklaces and bracelets. Use with round cord, also great for Kumihimo!
Size: 11mm (l) x 6.5mm (w). Inner diameter: 3.2mm.Hole size: 1.9mm.
Pack of 50 silver tone eyepins, some may be bent but are easily straightened with a pair of pliers. Ideal for a variety of jewellery making projects.
One pair of top quality 10mm silicone clutch earring backs in a silver coloured finish.
Pack of two or pack of ten x 3mm covers, ideal for use with 2mm and smaller crimps.
Ball size: 3mm Post length: 9.5mm Loop: 1.2mm Backs not included, available separately
Small scroll earring backs. Size: 2.6mm (h) x 4mm (w)
Pack of 100, made of flexible wire, split rings are like a small key ring and offer greater security than a jump ring.
Pack of 5g (approx 120 bead caps). Size : 7mm (w) Hole size: 1.3mm
Size: approx 18mm Ball size approx: 3mm For hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: 18mm x 9mm Available in packs of 1 pair or 5 pairs of earwires. Stainless steel grade 316L.
Wire thickness: 21 gauge (0.7mm approx.) Length: 1" approx 25mm. Pack of 20 or bulk pack of 144 silver plated head pins.
Wire thickness: 21 gauge (0.7mm approx.) Length: 2" (50mm approx.) Pack of 20 or bulk pack of 144 silver plated head pins.
Pack of 2 or pack of 10 Sterling silver headpins, an essential for all your jewellery making projects.
Size: 6mm (w) x 4.5mm (h). Hole size: 1mm.
Diameter: 0.7mm Sold per 35cm length.
Size: 6.9mm (w) x 14.8mm (l) Hole size: approx. 1mm. Antique silver plated magnetic clasp, designed especially for use with Matubo GemDuo beads.
Available in packs of 1 pair or 5 pairs of earwires. Sterling silver ear wires with a 3mm bead and wire coil, a quality product for your jewellery making projects.
Size:11mm (overall length from top of the loop) x 7mm (w). Hole size for stringing material: 4.5mm. Hole size for hanging pendant: 1.6mm.
Size:11mm (overall length from top of the loop) x 7mm (w). Hole size for stringing material: 4.5mm. Hole size for hanging pendant: 1.6mm.
Diameter of wire: approx. 1mm Pack of 100 5mm brass jump rings.
Size: 6.9mm (w) x 14.8mm (l) Hole size: approx. 1mm. 24k gold plated magnetic clasp, designed especially for use with Matubo GemDuo beads.
Size: 5.9mm (w) x 7.5mm (l). Hole size: approx. 1.6mm. Hole size (for thread): 1mm. Antique silver plated bead endings, designed especially for use with Matubo GemDuo beads.
Size : 12.5mm (w) x 16.6mm (l)Bar : 23.8mm in length
Pad size: 8mm Pin length: approx. 12mm Stainless steel post and brass head. For hygiene reasons earring findings cannot be returned once opened, unless faulty.
Size : 13mm (w) x 17mm (l)Bar : 20.5mm in length
Length: 11mm Available as a pack of 10 or as a bulk pack of 40 bails.
Size: 6mm. Depth: 2.5mm. Hole size: approx. 1mm.
Size: approx. 18mm. Ball size: 3mm. For hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: approx. 18mm. Ball size: 3mm. For hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: approx. 15mm (l) x 10mm (w). Loop size: 1.3mm.For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Size: 12mm x 6.5mm. Hole size: 1.3mm.
Size: 6mm (w) x 2mm (d). Hole size: approx. 1.2mm.
12mm (l) x 6mm (w). Hole size approx: 1.3mm
Size: 5.5mm (w) x 2mm (d). Hole size: approx. 1.5mm.
Wire thickness: 21 gauge (0.7mm approx.) Length: 1.5" / 38mm. Pack of 20 or bulk pack of 144 silver plated head pins.
Size: 9mm (total length) x 4mm (external width)/3.2mm (internal width).Hole size: 1.7mm.
Size: 15mm. Hole size: approx. 13.2mm. Sold singly.
Size: 15.5mm x 10.5mm. Hole size: approx. 0.8mm. Pack of two antique silver plated bead endings, designed especially for use with Miyuki Tila beads. Perfect for three row designs.
Size: 26mm x 10.5mm Hole size: approx. 0.8mm. Pack of two antique silver plated bead endings, designed especially for use with Miyuki Tila beads. Perfect for five row designs.
Pack of 200 large tube crimp beads, a jewellery making essential.
Size: 9mm (total length) x 4mm (external width)/3.2mm (internal width).Hole size: 1.7mm.
Size: 22mm (l) x 14mm (w). Thickness: approx. 2.4mm. Hole size: 1.5mm.
Crucifix size: 50mm (l) x 24mm (w). Virgin Mary connector size: 22mm (l) x 14mm (w).
Size: 7mm (d) x 11mm (l) Hole size: approx. 1.5mm. Top quality, silver plated, brass magnetic clasp. Sold individually.
Size: approx. 26mm (l) x 10mm (w). Loop size: 2mm.For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Size: 15mm (l) x 11mm (w).Bar: 17mm in length. Hole size: 1.5mm.
Size: approx 18mm. Ball size: approx. 3mm. For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Size: approx. 18mm.Ball size: 3mm.For hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: approx. 26mm (l) x 10mm (w). Loop size: 2mm.For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Available as a pack of 1 pair, a quality product for your jewellery making projects.
Size: approx. 26mm (l) x 10mm (w). Loop size: 2mm.For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Size: 19.6mm (w) x 8mm (l). Hole size: approx. 1.5mm. Hole size (for thread): 1mm. Antique silver plated bead endings, designed especially for use with Matubo Superduo beads. Will also work with size 8 seed beads.
Size: 5.9mm (w) x 7.5mm (l). Hole size: approx. 1.6mm. Hole size (for thread): 1mm. 24k gold plated bead endings, designed especially for use with Matubo GemDuo beads.
Size: approx. 18mm For hygiene reasons ear wires cannot be returned once opened, unless faulty.
Size: 3mm. Wire diameter: approx. 0.6mm.
Size: 15mm (l)The hole size of the loops is approx. 2mm.
Pack of two slide tubes designed for use with bead weaving projects made with Delica beads. They have side flaps that are open on both ends. To attach simply slide an end row of beads into the tube, then fold down the side flaps and attach the loop to the clasp.
Size: approx. 18mm Ball size: 3mmFor hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: approx. 18mm Ball size: 3mmFor hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: 20mm (l) x 14mm (w). Hole size: approx. 1.5mm. Lead, nickel and cadmium free.
Size: 34mm (l) x 27mm (w). The hole size at the top of the connector is approximately 2mm. Sold singly.
Size: 17.5mm (l) x 14mm (w).Bar: 21mm in length. Hole size: 1.9mm.
Size: 20mm (l) x 20mm (width at widest point). Hole size: 1.8mm.
Size: 19mm (l) x 12mm (w). Hole size: 2.3mm. Sold singly.
Pin length: approx. 11mm. Ball size: 4mm. Loop: 1.3mm. For hygiene reasons earring findings cannot be returned once opened, unless faulty.
Size: 6mm.Depth: 1.5mm.Hole size: approx. 1mm.
4g pack of small round crimp beads, a jewellery making essential.
Size: 16mm (l) x 8mm (w). Hole size: approx. 1.5mm. Lead, nickel and cadmium free.
Size: 3.7mm (width at widest point) x 8mm (l). Hole size: approx. 1.5mm. Hole size (for thread): 1mm. Antique silver plated bead endings, designed especially for use with Matubo Superduo beads.
Size: 3.7mm (width at widest point) x 8mm (l). Hole size: approx. 1.5mm. Hole size (for thread): 1mm. 24k gold plated bead endings, designed especially for use with Matubo Superduo beads.
Size: 4.6mm (width at widest point) x 5.4mm (l). Hole size: approx. 1.5mm. Hole size (for thread): 1mm. Antique silver plated bead endings, designed especially for use with Matubo Superduo beads.
Size: 4.6mm (width at widest point) x 5.4mm (l). Hole size: approx. 1.5mm. Hole size (for thread): 1mm. 24k gold plated bead endings, designed especially for use with Matubo Superduo beads.
Length: 33mm Top quality, nickel free, brass earwires. For hygiene reasons earwires cannot be returned once opened, unless faulty.
Size: 14mm. Hole size (for wire): approx. 1.2mm. Fits: 6mm bead.
Size: 5mm. Diameter of wire: approx. 1mm.
3mm, silver tone, crimp bead covers. Ideal for use with 2mm, and smaller, crimps.
Clasp size: 10mm (l) x 6 (w) Jump ring: 4mm Pack of one clasp.
Size: 18mm (l) x 12mm (w). Hole size: approx. 1.5mm. Lead, nickel and cadmium free.
Pin length: approx. 12mm. Ball size: 4mm. Loop: 2mm (runs from side to side). Stainless steel grade 316L.Lead and nickel free. For hygiene reasons earring findings cannot be returned once opened, unless faulty.
Pack of ten pairs of, top quality, brass butterfly scroll earring backs.